- Extremely lightweight and compact 2-person tent
- Made from tear-resistant ripstop material
- Breathable
- Water column: outer tent 5,000 mm, inner tent floor 3,000 mm
- Incl. transport bag, pegs and tensioning cords
- Pack size: 46 x 19 cm
- Inner dimensions: 190 x 120 x 100 cm
- Dimensions when pitched: 190 x 143 x 118 cm
Attention outdoor adventurers! With the super-light Fast - T2 tent from Bushpeak, a comfortable night in the open air is guaranteed.
The breathable and tear-resistant ripstop material is extremely hard-wearing and yet light as a feather. The complete tent weighs less than 2 kg and fits into a large number of rucksacks thanks to its small pack size.
Setting up and taking down is child's play, even on your own. The intelligent tent pole system prevents incorrect assembly. The pegs and tension cords supplied secure the tent in adverse weather conditions.
Thanks to entrances on both sides, laborious climbing over each other in the tent is a
tent is a thing of the past. Even sitting upright inside is no problem.
No compromises when it comes to equipment - outdoor equipment from Bushpeak!
Bushpeak - Tested in the Alps
Instructions:
Check the tent for completeness and integrity before every outing. It is advisable to set up and take down the tent at home before using it for the first time so that you are familiar with it.
Spread out the inner and outer tent and remove the tent pole system from the bag.
Insert the tent poles into each other
and insert the ends of the poles into the orange fastenings provided on the flysheet.
Make sure that the outer tent is securely
with the tent poles
tied to the tent poles.
Hang the inner tent on the tent poles using the black plastic hooks and insert the ends of the poles into the orange fastenings.
Now place the tent in the desired location and anchor it with the pegs. Tension the tent with the cords and fasten these to the pegs in the ground.
To take down the tent, first remove the pegs and cords and store them in the corresponding bag.
Detach the inner tent from the tent poles and pull the ends out of the orange fastenings. Fold the long sides about a third towards the middle.
Now untie the cords of the outer tent and pull the ends out of the orange fastenings. Take care when extending the tent poles! As these are tensioned, there is a risk of injury if handled incorrectly. Fold the outer tent on the long sides approx. one third towards the middle.
Pull the individual sections of the tent pole system apart and stow them in the bag provided.
Place the inner tent in the middle of the outer tent and place the peg and tent pole bag on top. Now carefully roll up the outer tent together with the other parts and put the transport bag over it.
If the tent gets wet during use, remove it from the transport bag at home and hang it up to dry to prevent mildew from forming.
Extremely light
Super easy assembly
5,000 mm water column
Compact pack size
| Weight: | 1850g |
|---|
Login
No reviews found. Share your insights with others.
